I. Feeding feature by PLC program from MITSUBISHI:
1.NC Servo feeding. Operating with Computerize Numerical Control by PLC program from MITSUBISHI made in Japan. The electrical parts from YASKAWA made in Japan including Servo motor, driver, encoder, interface screen and so on.
2.High precision feeding: to meet the coming of hi-tech industry, controlled by computer closed circuit feedback system to keep precision degree within +/- 0.15mm
3.Feeding function: input 20 sets of different feed length, each group provides 999 times for punching or cutting to satisfy processing of special products.
4.High efficiency release device, match with adjustment of signal from the cutter or press machine through cable wire.
5.Setting of feed length: directly input feed length on the control plate, and then it can reach needed distance, feed length max 9999.99mm. speed max 40m/min
II. Straightening feature:
1.3 in 1 uncoiler and straightener saves space and increase productivity.
2. Straightener and thickness adjustment by 4 worm gear micro-adjuster withreading 0.1mm advance reference indicator.
3.Feed and straightener roll with a hard chrome plated.
4.High rigid mechanical design sturdy construction, and high power output to secure proper straightening and feeding during the speed increasing efficiency.
5.Electric loop control system.
6. Hold down arm device
7.Inverse curve roll, easy to set up the curve up or down of feeding exit direction.
8.Feeding line easily adjusted by advance worm gear screw Jacks device
9.Coil Material Entry support Assembly can bring the material into pinch rollers Automatically to save man power and increase safety,
10.Coil side guide
11.Outgoing catenary to assist and support the material
12.A Clusster gear set maximizes transmission of horse power.
13.Transformer
Specification:
| Item Model |
TNCF1-300 |
TNCF1-400 |
TNCF1-500 |
TNCF1-600 |
| Coil Width(mm) |
55-300 |
55-400 |
55-500 |
55-600 |
| Coil Thickness(mm) |
0.15-1.5 |
| Uncoiler Expansion |
Hydraulic |
| Load Weight(kg) |
2000-3000 |
| Coil I.O.(mm) |
508 |
| Coil. O. D (mm) |
1200 |
| Servo Motor (kw) |
AC 0.75 |
AC 1.5 |
AC 2.2 |
|
| Uncoiler Motor |
1.5kw |
2.2kw |
| Straightener Roll (Qty) |
Upper8/lower9 |
Upper10/lower9 |
| Feed Roll |
Upper 1/ lower 1 |
| Feed pitch Accuracy(mm) |
+/-0.15 |
| Loop Control |
Electric eye sensor |
| Speed Range ( m/min) |
0-16 |
| Air Supply (kg/cm2) |
5 |
Straightening performance:
| mode |
material width(mm) |
| type |
material thickness range(mm) |
300mm |
400mm |
500mm |
600mm |
| Material thickness |
0.15 |
300mm |
400mm |
500mm |
600mm |
| 0.35 |
| 0.6 |
| 1 |
200mm |
| 1.2 |
150mm |
500mm |
| 1.5 |
100mm |
400mm |
400mm |
|
