Special precision material straightener
material straightener of high precision, high speed and special structure for sheet
It is powerful new equipment, used in high-speed pressing; it can improve the quality and quantity of press workpieces. GJ two-section type straightening, the head is during roll straightening , there is no need straightening in the midway. In order to get good performance, the rolling material has to be straightened
Specification of JM3 Series:
(JM3 whole-section type straightener suitable for straightening of continoual rolling and slice material, its features are similar with that of one-section type)
| Specification |
JM3-100 |
JM3-200 |
JM3-300 |
JM3-400 |
| material thickness (mm) |
0.3~1.2 |
0.3~1.2 |
0.3~1.0 |
0.3~1.0 |
| material width (mm) |
0~100 |
0~200 |
0~300 |
0~400 |
| idler wheel arrangement |
32 (up7 / below8) |
| adjusting type |
four-point freestanding type |
| clean speed |
0~16m/min |
| motor |
1/2HP |
1HP |
| feeding direction |
left n right |
| working voltage |
AC three-phrase 200V/380V |
| weight (kg) |
150 |
200 |
250 |
300 |
Specificatio of GJ Series:
| Specification |
GJ-100A |
GJ-200A |
GJ-300A |
| material thickness (mm) |
0.1~0.6 |
| material width (mm) |
0~100 |
0~200 |
0~300 |
| idler wheel arrangement |
20 (up7 / below8 + up9 / below10) |
| adjusting type |
eight-point freestanding type |
| clean speed |
0~16m/min |
| motor |
1/2HP |
1HP |
| feeding direction |
leftn right |
working voltage
|
AC three-phrase 200V/380V |
| weight (kg) |
150 |
200 |
250 |
|
